Extrude - In the part environment, if no bodies exist, will prompt for the input dimension of a mid-plane extrusion; otherwise will use extrude traditionally (end condition should be remembered as normal)Cut - Will cut up to next in whichever direction removes material - Best if in the sketch environment or if you have a sketch selected.

otomatik yuzey

根据文件名修改自定义属性，以空格或者”(“分隔（不区分中英文括号），分隔符可自行设置。分离规则有三种，仅支持中文。例如： 文件名：”123abc 哈哈哈“ 宏→ 名称（哈哈哈） 图号（123abc） 规格型号（图号：123abc） 文件名：“啊啊啊 哈哈哈” 宏→ 名称（啊啊啊） 图号（哈哈哈） 规格型号（哈哈哈） 文件名：”嗯嗯嗯“ 宏→名称（嗯嗯嗯） 图号（ ） 规格型号（ ）

제공되지 않음

Press on a part and use the Macro to open it separately from the assembly. I have assigned this Macro to the key 'O' to gain quick access to the part.

제공되지 않음

제공되지 않음

Avoid conflicts of parts taken from SW Toolbox when working in a network with different libraries of Toolbox.

This macro was created to help NC Programmers utilize a SOLIDWORKS part model that has read-access only. This macro inserts the read-only engineering model into a read/write manufacturing part model that allows the NC Programmer to create tool-paths and maintain associativity to the engineering model. This is helpful for any Gold Solution NC Programming partner that stores their manufacturing data inside a SW Part (such as CamWorks). This technique is useful when NC Programmers have read-only access to the engineering model within PDM. This macro also has a .bmp included so it can be customized as a button with the SW UI.

Ability to check for bad geometry in Parts while running the Design Checker.