Hallite 735 is a compact double-acting piston seal assembly designed for one piece pistons and is suitable for low to high pressure, medium to heavy duty applications.

SolidComponents^TM

The Hallite 730 double-acting piston seal in a four part assembly is designed for use in heavy-duty applications where position holding ability is important.

For use in heavy-duty applications where position holding ability is important, such as longwall mining roof support applications using water-based fluids and large diameter crane cylinders using standard hydraulic oils. The Hallite 730 is comprised of a tough, wear resistant thermo

SolidComponents^TM

The Hallite 714 double-acting piston seal is a compact seal for medium to heavy-duty applications.

In double-acting telescopic cylinders or phasing cylinders, the seal’s reinforced, heat-stabilized, thermoplastic sealing face with step-cut joint is an ideal choice because it allows the seal to pass over ports without damage. The rugged, extrusion resistant design also performs extremely well in high-pressure off-highway and earth-moving ap

SolidComponents^TM

Hallite’s 616 is a compact, asymmetric twin lip rod seal offering excellent dry rod sealing for light and medium-duty applications where space and friction are at a premium.

The seal is manufactured in Hythane® 181, Hallite’s high-performance polyurethane, for easy installation and excellent low temperature performance. The Hallite 616 design incorporates the sealing efficiency of the Hallite 605 rod seal with the compact grooves used by

SolidComponents^TM

Wiper without steel sleeve.

SolidComponents^TM

Wiper with steel sleeve.

SolidComponents^TM

As standard, it comprises a tough, wear resistant termoplastic elastomer face which is preloaded by an O-ring. The housing width allows a narrow piston to be used. It is recommended that an adeqate bearing is mounted on one or both sides of the seal.

Operating conditions Maximum speed 4.0 m/sec Temperature range -30°C - +110°C Maximum pressure 350 bar

SolidComponents^TM

Operating conditions Maximum speed 1.0 m/sec Temperature range -45°C - +400°C Maximum pressure 400 bar

SolidComponents^TM

Capable of operating in dirty conditions, the propotions of polyurethane wiping lip allow it to follow the side movement of the rod and clear away heavily deposited dirt. Suitable for light, medium and heavy duty applications.

Operating conditions 
   Maximum speed             1.0 m/sec 
   Temperature range 

SolidComponents^TM

The propotions of the precision trimmed wiping lip ensure contact with the rod surface to remove all deposits of bud and other forms of contamination exept for those found in heavy duty industrial applications.

Operating conditions 
   Maximum speed                4.0 m/sec 
   Temperature range&nbs

SolidComponents^TM