Nut models: UPFC, USFC
Unit: mm

Remarks
1. We recommend NSK support unit WBK20-01A (square type, fixed side), WBK20S-01 (square type, simple support
side), and WBK20-11 (round type, fixed side).
2. NSK grease LR3 is recommended. The amount for replenishing should be about 50% of nut internal space capacity.
3. Nut does not have a seal.
4. Permissible rotational speed is determined by a d • n value and a critical spee

SolidComponents^TM

Nut models: LPFT, LSFT
Unit: mm

Remarks
1. We recommend NSK support unit WBK20-01A (square type, fixed side), WBK20S-01 (square type, simple support
side), and WBK20-11 (round type, fixed side).
2. NSK grease LR3 is recommended. The amount for replenishing should be about 50% of nut internal space capacity.
3. Permissible rotational speed is determined by a d • n value and a critical speed. See page B509.
Root diamet

SolidComponents^TM

Nut models: LPFT, LSFT
Unit: mm

Remarks
1. We recommend NSK support unit WBK20-01A (square type, fixed side), WBK20S-01 (square type, simple support
side), and WBK20-11 (round type, fixed side).
2. NSK grease LR3 is recommended. The amount for replenishing should be about 50% of nut internal space capacity.
3. Permissible rotational speed is determined by a d • n value and a critical speed. See page B509.
Root diamet

SolidComponents^TM

Nut models: PFT
Unit: mm

Remarks
1. We recommend NSK support unit WBK20-01A (square type, fixed side), WBK20S-01 (square type, simple support
side), and WBK20-11 (round type, fixed side).
2. Only rust preventive agent is applied at time of delivery. Please apply lubricant (oil or grease) before use.
3. Permissible rotational speed is determined by a d • n value and a critical speed. See page B509.
Root diameter of sc

SolidComponents^TM

Nut models: PFT
Unit: mm

Remarks
1. We recommend NSK support unit WBK20-01A (square type, fixed side), WBK20S-01 (square type, simple support
side), and WBK20-11 (round type, fixed side).
2. Only rust preventive agent is applied at time of delivery. Please apply lubricant (oil or grease) before use.
3. Permissible rotational speed is determined by a d • n value and a critical speed. See page B509.
Root diameter of sc

SolidComponents^TM

Nut models: PFT
Unit: mm

Remarks
1. We recommend NSK support unit WBK20-01A (square type, fixed side), WBK20S-01 (square type, simple support
side), and WBK20-11 (round type, fixed side).
2. Only rust preventive agent is applied at time of delivery. Please apply lubricant (oil or grease) before use.
3. Permissible rotational speed is determined by a d • n value and a critical speed. See page B509.
Root diameter of sc

SolidComponents^TM

Nut models: PFT
Unit: mm

Remarks
1. We recommend NSK support unit WBK20-01A (square type, fixed side), WBK20S-01 (square type, simple support
side), and WBK20-11 (round type, fixed side).
2. Only rust preventive agent is applied at time of delivery. Please apply lubricant (oil or grease) before use.
3. Permissible rotational speed is determined by a d • n value and a critical speed. See page B509.
Root diameter of sc

SolidComponents^TM

Nut models: UPFC, USFC
Unit: mm

Remarks
1. We recommend NSK support unit WBK15-01A (square type, fixed side), WBK15S-01 (square type, simple support
side), and WBK15-11 (round type, fixed side).
2. NSK grease LR3 is recommended. The amount for replenishing should be about 50% of nut internal space capacity.
3. Nut does not have a seal.
4. Permissible rotational speed is determined by a d • n value and a critical spee

SolidComponents^TM

Nut models: LPFT, LSFT
Unit: mm

Remarks
1. We recommend NSK support unit WBK15-01A (square type, fixed side), WBK15S-01 (square type, simple support
side), and WBK15-11 (round type, fixed side).
2. NSK grease LR3 is recommended. The amount for replenishing should be about 50% of nut internal space capacity.
3. Permissible rotational speed is determined by a d • n value and a critical speed. See page B509.
Root diame

SolidComponents^TM

Nut models: LPFT, LSFT
Unit: mm

Remarks
1. We recommend NSK support unit WBK15-01A (square type, fixed side), WBK15S-01 (square type, simple support
side), and WBK15-11 (round type, fixed side).
2. NSK grease LR3 is recommended. The amount for replenishing should be about 50% of nut internal space capacity.
3. Permissible rotational speed is determined by a d • n value and a critical speed. See page B509.
Root diamet

SolidComponents^TM