SolidComponents^TM

The K2 roller cam is easy to adjust according to your needs with a Torx-bit. Set it so that the door closes smoothly and is kept securely shut.
The roller cams reduces the friction in the latching operation and increase the gasket compression.



You can connect several roller cams in series to be operated with only one handle. See page 2-315f for rod link. Interlink rods, see page 2-313a.

The roller cam is supplied with

SolidComponents^TM

A large supply of handle combinations - tool operated, key locking and non-locking, depending on your application.
System K2 Klimaflex™ is designed for extreme simplicity in mouting in your insulated (double skinned) door application.


The inswing handle has a built-in adjustable roller cam that reduces the friction in the latching operation and increase the gasket compression. The cam is normally placed on the left side of th

SolidComponents^TM

The K2-technology allows for quick mounting in double-skinned doors with the thicknesses described in the table below. When the screw is turned with a torx-bit (not included) expanding ”legs” are engaged and fix the door skins from the inside of the door.

You can wait until the last minute adding the handle on the inside or outside - and you are free to add a rod link or safety catch with no changes to the latching unit. K2 - System Klimaf

SolidComponents^TM