External bolt-on hinge for surface mounted doors.

Universal left and right mounting. Opening angle 180°. Supplied unassembled, with nuts and washers.

MATERIAL:
Hinge and nut: Steel, zinc plated.
Pin and washer: Brass, zinc plated.

SolidComponents^TM

Bolt-on hinge for surface mounted doors with recessed holes for outside mounting.

Universal left and right mounting. Opening angle 180°. Supplied assembled.

MATERIAL:
Hinge part: Zinc die-cast, zinc plated, chrome plated or black coated.
Shaft: Brass, zinc plated.
Washer: Brass.

SolidComponents^TM

External bolt-on hinge for surface mounted doors.

Universal left and right mounting. Opening angle 180°. Supplied with M6-screws and assembled.

MATERIAL:
Hinge: Zinc die-cast, zinc plated or black coated.
Pin and screw: Steel, zinc plated.
Washer: Brass, zinc plated.

SolidComponents^TM

External bolt-on hinge for surface mounted or flush mounted doors.

Universal left and right mounting. Opening angle 180°. Two-part version in lift-off design, and three-part versions in fixed design. Three-part version (drawing C) with elongated center for flush mounted doors. Supplied unassembled, with nuts and washers.

MATERIAL:
Hinge and nut: Steel, zinc plated.
Pin and washer: Brass, zinc plated.

SolidComponents^TM

External bolt-on hinge for surface mounted doors. Universal left and right mounting. Opening angle 180°. Two-part version in lift-off design, and three-part version in fixed design. Supplied unassembled, with nuts and washers.


MATERIAL:
Hinge and nut: Steel, zinc plated.
Pin and washer: Brass, zinc plated.

SolidComponents^TM

Lift-off hinge for surface mounted doors. Universal left and right mounting. Opening angle 180°. Concealed mounting with screws from the inside.


MATERIAL:
Hinge: Zinc die-cast, zinc plated or black texture powder coated.
Pin: Stainless steel (304).

SolidComponents^TM

Hinge for surface mounted doors. Holes for countersunk M5-screws, and bushings to reduce friction when opening / closing.


Door and framepart are mounted separately, and the pin is locked when pushed in place, with a fixed polyamide clip to secure the assembly. Universal left and right mounting. Protection degree IP65 / NEMA 4. Supplied unassembled.

MATERIAL:
Hinge parts: Zinc die-cast, chrome plated or black texture powder

SolidComponents^TM

Lift-off hinge for adjacent doors. Cast-in steel bolts for assembly from the inside. For door thickness of maximum 4 mm. Supplied with nuts.

Opening angle 180°. Lift-off enabled in open position.

MATERIAL:
Hinge: Zinc die-cast, black texture powder coated.
Bolts: Steel, zinc plated.
Other surface treatments on request.

SolidComponents^TM

Polyamide corner hinge for surface mounted doors. Frame part is mounted, using one screw and nut from the inside. The door part is attached to the door and the pin is inserted into the hinge.

Universal left and right mounting. Opening angle 180°.
For plate thickness 1,2 - 1,5 mm.

MATERIAL:
Door and frame part: Glass fibre reinforced polyamide (PA6), black.
Pin: Delrin.

SolidComponents^TM

Corner hinge for surface mounted doors. Frame part is mounted, using one screw from the inside. The door part is attached to the door and the pin is inserted into the hinge. For plate thickness 1,0 - 1,5 mm. Supplied with special pin for grounding.

Universal left and right mounting. Opening angle 180°.

MATERIAL:
Hinge: Zinc die-cast, chrome plated, black chromated or black coated.
Pin: Hardened steel.

SolidComponents^TM